Cast Iron Valves
SLUICE VALVE
- Construction : Bolted Bonnet, inside screwed non-rising spindle
- Body Materials : Cast Iron
- Trims : Bronze / Stainless Steel.
- End Connection : Flanged IS/BS/DIN/ASA/API
- Manufacturing Standard :IS:780, IS:2906 : BS:5150 / BS:1218 / BS:5163 /BS:3464 / DIN:3204
- Pressure Class :PN: 0.4, 0.6, 1.0 & 1.6
Note : IS:14846 : 200 are also available - Sizes : 50 mm to 1200 mm
- Other Features : Gear, by-pass, indicator, Head Stock, Extension spindle, Actuator operated, pneumatic operated.
GATE VALVE
- Construction : Bolted Bonnet, Outside screwed rising spindle
- Body Materials : Cast Iron
- Trims : Bronze / Stainless Steel.
- End Connection :Flanged IS/BS/DIN/ASA/API
- Manufacturing Standard :IS:780, IS:2906 : BS:5150 / BS:1218 / BS:5163 / BS:3464 / DIN:3225
- Pressure Class :PN : 0.4, 0.6, 1.0 & 1.6
- Sizes :50 mm to 1200 mm
- Other Features : Gear, by-pass, indicator, Head Stock, Extension spindle. Actuator operated, pneumatic operated.
GLOBE VALVE
- Construction : Bolted Bonnet, Outside screwed rising spindle.
- Body Materials : Cast Iron
- Trims : Bronze / Stainless Steel
- End Connection : Flanged IS/BS/DIN/ASA/API
- Manufacturing Standard :IS : 9338 / BS : 1873
- Pressure Class :(PN 1.0 & 1.6)
- Sizes : 15 mm to 300 mm
- Other Features : Gear, by-pass, indicator, Head Stock, Extension spindle. Actuator operated, pneumatic operated.
SWING TYPE CHECK VALVE
- Construction : Bolted Cover, swing type
- Body Materials : Cast Iron
- Trims : Bronze / Stainless Steel.
- End Connection : Flnged IS/BS/DIN/ASA
- Manufacturing Standard : IS:5312 (Part-I & Part 2), BS : 4090
- Pressure Class :PN : 0.6, PN : 1.0 & PN : 1.6
- Sizes : 50 mm to 600 mm (Part I) & 600 mm to 1200 mm (Part 2)
- Other Features : By-pass arrangements, Dash-pot arrangements, Lever Weight Mechanism.
PISTON CHECK VALVE
- Construction : Bolted Cover, Piston Lift Type
- Body Materials : Cast Iron
- Trims : Bronze / Stainless Steel.
- End Connection : Flnged IS/BS/DIN/ASA/API
- Manufacturing Standard : IS : 9338
- Pressure Class :PN : 1.0 & 1.6
- Sizes : 15 mm to 300 mm
DUAL DISK CHECK VALVE
- Construction : Dual Disk type (Water/Flanged)
- Body Materials : Cast Iron / Cast Steel / Stainles Steel
- Trims : Synthetic Rubber / Bronze / Stainless Steel
- End Connection : Flanged BS/DIN/ASA/IS/API
- Manufacturing Standard :API:594
- Pressure Class :150/300/600/900
- Sizes : 80 mm to 1200 mm
FOOT VALVE
- Construction : Swing / Lift type
- Body Materials : Cast Iron/Cast Steel
- Trims : Leather / Rubber / Bronze / Stainless Steel
- End Connection : Flange IS/BS/DIN/ASA
- Manufacturing Standard : IS:4038
- Pressure Class :PN : 1.0 & 1.6
- Sizes : 50 mm to 300 mm
AIR VALVE
- Construction : Bolted Cover, Double Ball with / without Isolating Valve
- Body Materials : Cast Iron/Cast Steel
- Trims : Bronze / Stainless Steel
- End Connection : Flanged IS/BS/ASA
- Manufacturing Standard :Maker's Standard (Similar to G & K)
- Pressure Class :PN : 1 & 1.6
- Sizes : 25 mm to 200 mm
SAFETY VALVE
- Construction : Spring Loaded Angle pattern, Bolted Bonnet
- Body Materials : Cast Iron/Cast Steel
- Trims : Bronze / Stainless Steel
- End Connection : Flanged IS/BS/ASA
- Manufacturing Standard :Maker's Standard
- Pressure Class :PN : 1.0 & 1.6
- Blow-Off-Pressure : 0 to 150 Psi upo 200 mm sizes o to 100 Psi above 200 mm sizes
- Sizes : 15 mm to 300 mm
DIAPHRAGM VALVE
- Construction : Bolted Cover, Weir type
- Body Materials : Cast Iron
- Trims : Bronze
- Diaphragm : Rubber / Neoprene / P.T.F.E.
- Lining Material : Rubber / Neoprene / Ebonite / Lead
- End Connection : Flanged IS/BS/DIN/ASA Screwed BSP / NPT
- Manufacturing Standard : (Similar to SAUDERS Type - A)
- Pressure Class :PN : 1.0 & 1.6
- Sizes : 15 mm to 300 mm
FLOAT VALVE
- Construction : Bolted Cover, Angle Pattern
- Body Materials : Cast Iron / Cast Steel
- Trims : Bronze / Stainless Steel / PVC
- Lever, Fulcrum : Mild Steel (Galvanised)
- Float : Copper / Stainless Steel
- End Connection : Flanged IS/BS/DIN/ASA
- Manufacturing Standard :Maker's Standard
(Similar to G & K) - Pressure Class :PN : 1.0 & 1.6
- Sizes : 25 mm to 300 mm
- Special Features : Pilot Operated
MOTORISED GATE VALVE
- Construction : Bolted Bonnet, inside Screwed non-rising Spindle / Outside Scred Rising Spindle
- Body Materials : Cast Iron/Cast Steel
- Trims : Bronze / Stainless Steel
- End Connection : Flanged IS/BS/DIN/ASA
- Manufacturing Standard : IS:780 /IS:2906 / BS : 5150
- Pressure Class :PN 0.4, 0.6, 1.0 & 1.6
- Sizes : 50 mm to 1200 mm
- Details : Beacon-Rotrok / Limitorque Equivalent
BUTTERFLY VALVE
- Construction : Tight Shut-off / Low-leackage type
- Body Materials : Cast Iron / Cast Steel / Pneumatics Operated
- Trims : Bronze / Stainless Steel / Rubber
- End Connection : Wafer / Flanged to IS/BS/DIN/ASA
- Manufacturing Standard :AWWA-C-504/BS. 5155 / IS : 13095
- Pressure Class :PN : 1.0 & 1.6
- Sizes : 50 mm to 1500 mm
- Details : Gear arrangement / Motor Operated /Body Matter
LANDING VALVE
- Construction : Screwed Bonnet, rising spindle
- Body Materials : Cast Iron/Gun Metal/Alluminium/Stainless Steel
- Trims : Client Requirement
- End Connection : IS
- Manufacturing Standard : IS : 5290 TYPE A & B
- Pressure Class :PN : 1.6
- Sizes : 80 mm to 100 mm
FIRE HYDRANT
- Construction : Cast Iron, Bolted Bonnet
- Body Materials : Cast Iron
- Trims : Gun Metal / Stainless Steel
- End Connection : IS
- Manufacturing Standard :IS : 909, Fig IA & IB
- Pressure Class :PN : 1.0 & PN : 1.6
- Sizes : 80 mm
Note : Apart from displayed pictures and items, we also manufacture the items as 'Y'-type, pot-type, duplex stainer etc., for which we are unable to put the picture, besides above displayed and mentioned items. If you require any more item, please conact us.